1 / 8
Trapstar Keychain & Logo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keychain and Logo of Trapstar
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 191
- Makes
- 1
- Views
- 851
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution
Trapstar Keychain & Logo
Contains multiple versions:
- Hollow - Keychain with text
- Solid - Plain Keychain with no text
- Horizontal & Vertical - different orientation of hole for keyring - see bellow
Also contains models with no hole for keyring (all versions), called logo. You can add your own directly inside slicer, or print it as it is, like a logo
Hollow vs. Solid
| Hollow | Solid |
 |  |
|
|
Horizontal vs. Vertical
| Horizontal | Vertical |
 |  |
|
|
I printed it with following settings
| Nozzle | 0.4mm |
| Layer Height | Horizontal - Variable - Adaptive (highest possible, smaller around hole) |
| Vertical - Highest possible | |
| Wall Loops | 12 or more (to replace infill) |
| Infill | Replaced by walls |
| Supports | None |
| Brim | None |
Printing takes around 10-15 minutes (depends on model) on Bambu Lab A1 mini (Standard speed)