Macropad-Cheap and Quick DIY
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The worlds quickest to make and simplest yet best macropad!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 1
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a very cheap macropad(4 usd) you can use for typing your emails or passwords.
It has USB C
Components used:
RP2040 Zero(from Waveshare or chinese copy)
https://a.aliexpress.com/_EQsV7VT
4 key flexible nupad
https://a.aliexpress.com/_EJjBgLL
maybe some glue and hot glue
Will be adding links soon.
Probably any small dev baord such as arduino nano or mini esp would fit but i did not test. I made it specificaly for the rp2040 zero as they have usb C
The code you upload with arduino IDE
Here is the code and schematic on the github page: https://github.com/AllexRaresh/MacroPad
Print at 0.2mm layer height
There are 3 versions of the base:
Ultra slim(good luck)
Normal version(for the version with unsoldered pins)
Taller version
There are 2 versions of the Top:
Normal(hollow, less fillament, more space)
Filled(worse)
You have to glue the PICO upside down so that the usb c goes trough the hole
I recommend using the taller version to have more space for the cables.
Will add better versions after feedback