Original Prusa Enclosure (OPE) - Middle Foot
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.98 – €1.20 net (excluding VAT)
For file: Prusa Foot Magnet 10 mm x 2 mm_0.4n_0.2mm_PETG_MK4IS_46m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.09 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 45.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keeps the bottom of the enclosure from bowing and flexing back and forth due to printing motions.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 91
- Makes
- 3
- Views
- 658
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple remix of the original midfoot for the prusa enclosure. All you need 2 magnets :
- 10mm x 2mm
just press them in and you're done.