Muscle rack tabletop bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to turn your muscle rack or other garage rack shelving into a work surface
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 78
- Makes
- 0
- Views
- 606
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I was doing a rework of my workshop and had an old muscle rack that i thought could make a good table for my printers, i designed this bracket to allow me to use a few countersunk wood screws to attach a work surface. It should also work on the many clones of muscle racks seeing as they all use similar dimensions. Just slot the brackets onto each corner, place a surface on top and install some screws. You may need an extension on your drill/impact driver.
You absolutely need to print this with at least 4 walls, 5 top and bottom layers and at least 25% infill, use an appropriately strong and rigid material and optimize your print settings for layer adhesion, in my case i used petg with part cooling turned off and printed at 260c.
I hope this is useful to someone!