Sliding Stop Block
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stop block that fits in an 8 mm slot such as for the Pantorouter or 3030 extruded aluminum.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A stop block used to position or reposition the work piece or fixture. On the Pantorouter it can be used to register the edge of the fence so that that the fence can be moved for another operation and then returned to the same location. It slides in the Pantorouter tabletop grooves which are approximately 8 mm wide. A 3030 aluminum extrusion typically has the same groove size giving it application in those machines also. A nut shaped to the groove and a knurled knob are used to fix the stop using a ¼-20 hex bolt and nut.
Print settings:
- Layer height: 0.2mm
- Perimeters: 3
- Infill: 15% honeycomb