1 / 1
SmallRig A7R5 Handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a handle that we designed to use at CES for verticle video content!
You will need an M4 threaded insert, a soldiering iron to insert it, and two ¼-20 machine screws.
We would not recommend printing this in PLA, only ABS or PETG.
Ours was printed at a .2mm layer height, 6 walls, 40% infill, and with Inland PETG.