1 / 1
Hobbywing Max6 G2 mount for Traxxas XRT
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of mounting plate to allow new Max6 G2 variant to fit XRT with no chassis mods when using a 90mm motor (eg. 5690)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 176
- Makes
- 0
- Views
- 1,551
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Remix of mounting plate to allow new Max6 G2 variant to fit XRT with no chassis mods when using a 90mm motor (eg. 5690). Fitment is tight when using a 5690, a 4990 should work with additional room due to the smaller diameter. When installing fasten the plate to the ESC using 4 cap head screws and then install the plate with 2 m3 button heads from underneath the chassis. I've tested using PETG with 5 walls, 5 top/bottom layers, and 15% gyriod infill and found it to be sufficient.