Parametric connector for 20 mm DN20 empty conduit / Leerrohrverbinder DN16 DN25 DN32 DN40
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connects two 20 mm outer diameter empty conduits. Parametric OpenSCAD model for different diameters
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 135
- Makes
- 0
- Views
- 649
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Connects two 20 mm outer diameter empty conduits.
Print without support. Don't forget to add a brim to make it stick.
With stop lip inside - overhang-friendly chamfered design for support free printing - to prevent one of them from sliding in too deep.
Scale for other diameters. If too tight or loose on your conduit, scale by 0.5 mm. Current inner diameter is 20.5 mm, wall thickness is 1.2 mm.
I added the OpenSCAD source file, so you can make your own edits for other diameters, heights or wall thicknesses e.g. DN16 DN25 DN32 DN40 ....