1 / 2
Morton MC30 Water Softener HC-SR04 Ultrasonic Salt Level Distance Sensor Bracket — image 1
1 / 2

Morton MC30 Water Softener HC-SR04 Ultrasonic Salt Level Distance Sensor Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a bracket for mounting an HC-SR04 ultrasonic distance sensor inside the salt well of a Morton MC30 water…

Rating
0 / 5
Likes
0
Downloads
34
Makes
0
Views
350
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Share Alike

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs )

This is a bracket for mounting an HC-SR04 ultrasonic distance sensor inside the salt well of a Morton MC30 water softener. This is part of a Home Assistant integration project.

This first version is minimalist. There is no cover yet designed, and the ESP module (ie, Wemos D1 Mini) has no set mounting space. There's still plenty of room for you to adhere one with foam tape. I plan to make a future version that has mounting accommodations for a D1 Mini or NodeMCU.

Sensor measurements in my tank are (+/- 0.01m):

Level 0: 0.82m

Level 1: 0.74m

Level 2: 0.66m

Level 3: 0.58m

Level 4: 0.50m

Level 5: 0.42m

Level 6: 0.34m

Level 7: 0.26m

Level 8: 0.18m

In my experience, filling from level 0 to level 8 is almost exactly 160 pounds of salt pellets (Diamond Crystal brand). Therefore each level increment equals about 20 pounds of salt or about 0.08 meters.

Example HA / ESPHome yaml coming soon!

~1 year update: Unfortunately I never got around to designing a full cover for it, and the salt eventually took its toll on the contacts between the Wemos D1 mini and the ultrasonic sensor. Next time around, I'll probably place the D1 mini inside the softener control housing, run wires from there, and cover up the circuitry of the ultrasonic sensor as best I can with silicone sealant.

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/gvvtS5NGuSh

Print Settings

Printer Brand:

Creality

Printer: 

CR-10S

Rafts:

No

Supports: 

No

Resolution:

1.0 nozzle x 0.32 layer

Infill: 

100

Filament: Amazon Basics PETG Black

 

 

 

Category: 3D Printing

Tags