1 / 1
Lens Wipes Holder (60x60mm) — image 1

Lens Wipes Holder (60x60mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A holder for lens wipes or anything else that fits. Holds 20 60x60mm or smaller wipes.

Rating
0 / 5
Likes
4
Downloads
54
Makes
0
Views
185
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Public Domain

A holder for lens wipes or anything else that fits. My wipes were a little larger than others so I made my own.

Interior dimensions are W 61mm x L 61mm x H 64 mm, wipes can fit horizontally or vertically. Wipes measure about 3.5mm at their thick side, so if you stagger them it fits 20.

Outer dimensions are 65mm on all directions for that cubical goodness. Walls are a sturdy 2mm.

Printing

Use 2 perimeters with 0.4mm nozzle. Doesn't require supports or infill. Use random seams if you don't want the seam to show up in one of the corners.

Consumes about 44g, prints in an hour with 0.20mm Speed IS profile on a MK4.

Tags