1 / 2
Carved Honeypot Planter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decorative flowerpot resembling a hand carved honey pot.
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 210
- Makes
- 1
- Views
- 750
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This is a roughly spherical decorative flowerpot resembling a hand carved honey pot featuring small surface imperfections.
It's designed to hold an inner pot, thus having no drainage hole.
—
At 100% scale the inner diameter and inner height is 10 cm each. You can scale accordingly to fit your inner pot. It's not recommended to make it smaller than 5 cm (i.e. 50%).
—
Printing tips:
- Does not need support if the layer height is at most half the nozzle diameter (e.g. 0.2mm layer height for a 0.4mm nozzle).
- Print the inner perimeter/wall before the outer perimeter.
- Use random Z seam placement.
- Printing in vase mode is not recommended due to the ~45° overhang at the bottom.
—
Trivia:
The bottom surface is supposed to be printed in black. If you have support for multicolor prints, feel free to do that.
—
