Stand for HP EliteDesk 800 G8 SFF
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.72 – €3.32 net (excluding VAT)
For file: Stand_0.3mm_PLA_MK3S_2h14m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.02 excluding VAT (range midpoint).
- Weight reported by the author
- 54 g
- Print time reported by the author
- 2.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Stand for HP EliteDesk 800 G8 (probably G6 - G9)
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 190
- Makes
- 0
- Views
- 1,102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I have printed this stand in PLA. To save some time, I used a layer height of 0.3 mm for most of the print. However, for the first 5 layers, I used a layer height of 0.2 mm to ensure a better adhesion to the bed. I also used an infill of 15% with a gyroid pattern, which was enough to make the stand sturdy and stable. You can experiment with different infill settings or increase the number of perimeters to achieve a 100% infill, but I found that it was not necessary for this model.
I am building a NAS from an old HP EliteDesk 800 G8 SFF, and this stand allows me to have the PC in a vertical position so it saves some desk space, as the PC occupies less horizontal area.
I hope you like my 3D printing project. If you have any questions or feedback, please let me know.