1 / 5
Power strip bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A power strip bracket to attach a power strip to a wall/furniture using some screws.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 83
- Makes
- 0
- Views
- 437
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- GNU General Public License v3.0
This is a power strip bracket, to be used with the model on the photograph that has a power switch. The models can be printed without supports (see below), with the screw holes pointing up, as can be seen in one of the photographs.
The bracket on the switch side has two variants:
- bracket-switch_print_with_supports: requires supports for a successful print.
- bracket-switch_no_supports: can be printed without supports, as shown on the photograph. This puts a 0.2 mm layer on the parts requiring support, so the holes are not printed on thin air. When the printing is finished, just cut the wires and you are done. This is optimized for 0.2 mm layers, but should work also with smaller layer size.
FreeCAD source files are provided just in case you need to modify the design.