1 / 3
Sizing fixes for AnkerMake M5 5015 Fan for Extruder Heatsink (for Hot Climates)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjusted the to fit inside the existing duct/cowling.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 55
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The bottom of the original design did not fit the existing fan duct. I adjusted the size to fit inside of the existing duct.
For the fan, I couldn't find a 24V 3-wire PWM type so I'm using a 2-wire and left the yellow wire disconnected. It means the fan only runs at full speed. The fan I'm using as 5.5 cfm at 39dBA sound so it's pretty quiet compared to the stock fan.
I made these changes with TinkerCAD. I'd file the results under the heading of “It's ugly but it works”