Square Storage Container (Vase Mode)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.81 – €0.98 net (excluding VAT)
For file: Square_Storage_Container_0.4n_0.2mm_PLA_MK3S_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.89 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small storage container (45x45x50mm) with snap-on lid.
- Rating
- 4.875 / 5
- Likes
- 114
- Downloads
- 492
- Makes
- 9
- Views
- 2,002
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Small storage container with snap-on lid which can be easily printed in vase mode.
The size of the container is 45x45x50mm.
Settings (0.4mm nozzle):
- perimeters width 0.6mm
- layer height 0.2mm
- 3 bottom solid layers.
You can use already sliced files. There are two versions one for PLA and one for PET (I use this file to print containers from recycled filament from PET bottles). It is set to sequential printing.
Update:
21.1.2024 - Added solid model files (suitable for scaling)