Bird fountain
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a bird fountain for small birds like parakeets
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 58
- Makes
- 0
- Views
- 663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
6 parts, top for bird bath and bottom for stand and sump, a lit plate and spout, then two alignment rings to be superglued on
the spout has holes to be screwed/bolted/pined to the lid. it's a channel for a small hose to be set within and zip tied if necessary.
YOU STILL NEED PUMP, POWER, HOSE. i used a small 5v 1L/min pump and aquarium air hose.
the alignment rings are glued in in order to NOT NEED SUPPORTS
water holding parts need to be highest quality prints the base and the top.
to print watertight i used like 5 walls and 6 top and 4 bottoms. turn up nozzle heat as well. print top and bottom at best quality everything else is fare game