1 / 1
Tofu style case for winry315 - Flat profile remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of @Boydi_57535 original "Tofu style case for winry315 "
- Rating
- 4 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 1
- Views
- 156
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I modded the angle of the case for my Winry315 15-key/3 Knob case (bought from Spiderisland on Aliexpress) to better suit my preference to use this macropod in a knob-up configuration.
Original Angled case by @Boydi_57535
Printed with Inland Natural PLA+ and a 0.4mm nozzle with 0.2mm layer height using 10% gyroid infill on my Ender V3 SE. While my case was usable, the top layer wasn't well-supported, leading to many gaps and holes. If I were to reprint, I would either add another top layer or two (up from 3) or try a different infill pattern.