Rimless Eyeglass spacer tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for Rimless Eyeglass Compression sleeves. I made a spacer tool to get consistent results
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 137
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rimless Eyeglass tool for trimming the compression sleeve to a consistent length. I have 3 spacers. 0.2mm 0.3mm which I used and 1.0mm which is too big but you can customize it to make thinner. Directions are to have the sleeve a little proud (sticking out) and not have the frame hitting the lens. This tool gives you a spacer to achieve consistent results. Press the sleeve through the glasses and hold in place with your thumb while cutting. I used the 0.3mm but I also printed a 0.2mm to try and 1.0mm that is too large but it can be customized.
I printed in PETG with 0.1 extrusion.