1 / 9
Crazy3dPrint CZ 300 locking bed leveling knobs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crazy3dPrint CZ 300 locking bed leveling knobs
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In order to print properly, you must enable support all and I had to enable brim, you may have better luck than I did without.
Depending on your printer you may have to ream out the holes, they are slightly larger than the bolt diameter.
when placing the nuts, they are a tight fit, so you may have to heat them up first and press them in.
You may have a slight clearance issue with the rear right knob, due to the z rail bracket. you can either lower the bracket slightly, file down the bracket, or shorten the knob.
4x m3 nuts are required