13/16-20 Clamping Nut Version 2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamping lock nut for the 13/16"-20 threads used by trim dies for the RT1500 and RT1200 trimmers from Dillon. Needs an…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 79
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Revised Version as Version 1 didn't work
Clamping lock nut for the 13/16"-20 threads used by trim dies for the RT1500 and RT1200 trimmers from Dillon.
Print settings: 11 walls so it prints as a solid
Version 2 Improvements:
After using the version 1, I noticed it didn't clamp like expected, I reduced the thread diameter and opened the clamping gap.
Version 2 also has a Voron spec heat set insert: https://www.amazon.com/ruthex-Threaded-Insert/dp/B0CDH36ZMX?
Initial impressions are this works significantly better than previous version.
BOM:
- 1x M3x12 or M3x16 SHCS
- Heat Set Insert - M3x5x4 Also known as Voron version (Amazon)
Pictures version is printed with ABS on a Voron Switchwire printer at 0.2mm layers.
Category: Sport & Outdoors