-2 Degree Picatinny Riser - 5 and 10 land options
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decline your picatinny rail by 2 degrees, in either 5 or 10 land options.
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 422
- Makes
- 2
- Views
- 1,646
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Intended for use with nerf blasters to accommodate longer-range blasting, these risers will tip your sight down by 2 degrees which will allow you to zero further out, or use sights that otherwise can't adjust low enough for your use.
Hardware:
30mm M5 button head screws
M5 Hex nuts
For the 5-land version, you need two of each.
For the 10-land version, you need three of each.
Printing:
Print the rail body section standing upright with the wider end on the bed.
Print the clamp section laying down with the “outside” face flat on the bed.
Update 5/6/24: Remove errant bolt hole in 10-land riser and clamp