Another Folding Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.84 – €1.02 net (excluding VAT)
For file: PhoneStand v4_0.4n_0.2mm_PLA_MK3_1h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 3 piece folding phone stand that accommodates larger phones with cases installed. No hardware needed.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 100
- Makes
- 1
- Views
- 476
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution
A minimalist portable folding phone stand for larger phones with cases installed. No hardware needed. The hinge pin is slightly undersized and has a slight radius on one end. Carefully insert it to join the 2 halves. It may take some force against a flat object. I suggest a minimum of 4 permitters for strength. I used PLA Pro with a .2mm layer height and 15% infill. Some sanding might be required, but it fit snug and worked great right off the printer for me. Print the parts oriented as shown in the slicer photo.