HSW conform Dish Washer Tab Dispenser (aka "the Tabinator")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dish Washer Tab Dispenser which can be used with the HSW universe or with some old school screws.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple Dish Washer Tab Dispenser Box which you can mount to a HSW or with some screws to a desired spot e.g. under the sink:

You can use the plain version or you can try the multicolor & multimaterial version so you can have the slide out of flexible filament to e.g. give the stack of tabs a gentle push so they can rearrange themself and don't stay blocked or so.

I used 3 x insert-with-M3.stl from
https://www.printables.com/de/model/152592-honeycomb-storage-wall/files
to fix the Tab Dispenser to the HSW:

The HSW_Tabinator_generic_PLA_TopCover can be used for the simple or multimaterial version to fix the Parts together if the friktion is not strong enough and/or you want to cover the refill opening:
