hex bathroom shelf organizer with drainage v1
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.70 – €8.19 net (excluding VAT)
For file: hex bathroom shelf organizer with drainage v1_PETG_0.2mm_i10_7h10m_2024114.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.45 excluding VAT (range midpoint).
- Weight reported by the author
- 106 g
- Print time reported by the author
- 7.17 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bathroom organizer with water drain to the front for drying wet things. Size: 200x100x82.8 with OBJ File for TinkerCad
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 63
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
ENGLISH
Bathroom organizer/shelf for shower gel, razor, soap, washcloth, hairbrush and much more.
The sloping base plate allows the water to drain to the front.
Water no longer accumulates under objects that are on an elevation.
It stays clean under the shelf and the shelf can be placed anywhere.
Not just for the shower, but also for next to the bathtub or sink.
With OBJ-File for TinkerCad in a ZIP-File
DEUTSCH
Badezimmer-Organizer/Regal für Duschgel, Rasierer, Seife, Waschlappen, Haarbürste und vieles mehr.
Durch die schräge Grundplatte kann das Wasser nach vorne abfließen.
Es staut sich kein Wasser mehr unter den Objekten, welche auf einer Erhöhung stehen.
Unter dem Regal bleibt es sauber und das Regal kann überall abgestellt werden.
Nicht nur für die Dusche, sondern auch für neben die Badewanne oder dem Waschbecken.
Mit OBJ-Datei für TinkerCad in einer ZIP-Datei
Printing parameters:
- Resolution: 0.2 mm
- Supports: no
- Filament: PETG (PLA, ASA and more)
- Infill: 10%
- Size: 200x100x82.8 (can be resized in the Slicer)