1 / 4
magnetic MFT Plugs with metal inlay
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to cover the holes of my MFT-table. So I designed my own plugs.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 92
- Makes
- 0
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These MFT-plugs have a metal disc inside, so you can get them out of their holes. The 20mm MFT-holes are chamfered with a 45° router bit. Either you can modify the height of your router bit until the plug fits flush with your worktable or you modify the chamfer in the included fusion360 file until it fits.
For the metal disc inside I used some from my local hardware store (BAUHAUS):
They are 1.2mm thick. Modify the fusion model for the discs you find.
As for the magnet, I used a magnet that I found with a M5 thread.