Raspberry Pi Zero W Mount/Container with Top Cover / Support for Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Zero W mount / containers for M5 or M3 holes. The dimensions are based on raspberry pi zero W measurements
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 72
- Makes
- 1
- Views
- 365
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Raspberry Pi Zero W holder/container that can be used for Rook / Rook 2020. The set supports now M5 or M3 screws to mount the container on the aluminum profile or any other panel with the mentioned hole sizes and the M2.5 sized screw to mount the Zero W on the container/holder. Please feel free to provide feedback. The M3 version is tested.
There are three (3) options to use / mount as follows:
Use M5 screws - use main STL
Use M3 screws - use M3 STL
Use M2.5 screw that passes through the zero holes and the container - use any of the 2 STLs
There is now a top container that supports mounting 3010 (30x30x10mm) brushless fan for cooling. Either use the default size 4mm and add some spacers OR use the 15mm.
You can see the YouTube short video here: