Garburator grate
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.19 – €3.90 net (excluding VAT)
For file: grate partial_0.6n_0.3mm_PETG_MK3SMMU3_3h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.55 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 3.62 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Protect your cutlery from falling into the garburator aka garbage disposal
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 41
- Makes
- 1
- Views
- 215
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
I can tell you one place that cutlery should not go and that is down the sink!
This grate allows water and small food bits to continue to flow down the sink while preventing cutlery and “big” food from gunking up the system.
Fits great in my InSinkErator brand garburator. This grate is 85.6mm / 3.37 inches in diameter.
STEP file is included