Holder for external fire extinguisher (1000 ml)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.38 – €4.13 net (excluding VAT)
For file: Holder_Extinguhser_Neu v5_0.4n_0.2mm_PETG_MK4IS_3h30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.75 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 3.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Wallholder for a small fire extinguisher with a diameter from 7.5 cm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter.
You need some support material to print the holder (please see the attached pictures).
The holder is designed with Fusion 360.