1 / 7
Nerf Rival Pathfinder XXII-1200 Sight Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces green sight with a blank or less intrusive iron sights.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
These replacement sights don't cause damage to the blaster and does not require the entire shell to be removed during assembly.
Parts include a blank sight (to completely remove the barrel sight), a low profile iron sight and a less intrusive iron sight that mimics the original.
PRINTING:
Recommended to print with PLA or PETG.
.3mf files included in the .ZIP
Note:
- the “leg” that supports the overhanging feature should be cut in half with flush trim snips (see images)
- The remaining part of the leg that is still attached to the overhang afterwards will slot into an exposed notch at the base of the sight assembly.
INSTALLATION:
- Remove the pump
- Remove the the 5 screws holding around the barrel (see image)
- Pull up on shell near sight and remove the original green sight
- Careful not to pull so hard as to break the plastic - it does not require much space to remove the sight
- Replace the sight with the new printed part
- If inserting the blank sight keep in mind the orientation of the part. The “leg” should fit inside the notch towards the rear of the original sight assembly.
- Replace screws & pump
Please visit our Etsy shop to see what else we do!
https://kettlefishcreations.etsy.com