1 / 1
Dart Zone Pro MK3 - Dual Sector Gear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Gear to double up on the Automatic fire rate
- Rating
- 4 / 5
- Likes
- 16
- Downloads
- 132
- Makes
- 0
- Views
- 636
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was replacing several other parts and couldn't help but pop the gear out to try my hand at a Dual Sector Gear. Just modeled up a couple gears to stick together and modeled out as the original gear.
Worked perfect for me but depending on your tolerances you may need to fiddle with the horizontal expansion setting.
Feel free to go your own, I'm sure .2 layers and lower infill is fine but here were my settings
Print Settings:
Layer Height:
0.15
Infill:
80%
Infill Pattern:
Gyroid
Supports:
Yes
I did print in ABS but it should be fine in PETG or even PLA