Fluke 177 DMM Holder for the Honeycomb Storage Wall
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW Holder to hold a Fluke 177 unobstructed, snug but also easy to remove.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 104
- Makes
- 1
- Views
- 591
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
After building a Honeycomb Storage Wall (HSW) I decided I wanted to put a lot of my leads and electronic equipment on the wall, including my Fluke 177 Digital Multimeter (DMM).
So here is my version of a holder that allows the user to slide the Fluke into, holds the meter leads on either side (Or simply wrap them around the holder) and the display, controls and plugs are all left unobstructed.
I printed mine in PLA+ Gun Metal Grey from 3D Printing Canada with a 0.4 Nozzle and 20% Infill. Model was printed vertically (bottom side on plate) and only used normal support in Cura just to support the HSW Inserts.
Note: The top Middle section of the model is slightly shorter and will need a tiny support if printing the top side on the plate.
I included the original STEP files I used to create this for tweaking if anyone would like to.
Cheers and good luck printing
-Cave