1 / 1
Arri Anti-Twist drill guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guide to add anti-twist holes to existing plates and fixtures
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 135
- Makes
- 0
- Views
- 610
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
A guide used to drill 3mm Arri anti-twist holes in existing plates and fixtures. Wse two screws to index and lock the guide in place and use a 3.1mm drill bit.
One of the ¼-20 holes is for the ¼-20 spec with is 10.4mm spacing. The other shares the 15mm spacing for 3/8-16 spec.
0.2 or 0.4mm nozzle is preferred due to thin wall of the ¼-20 hole with the closers spacing for ¼-20 spec.