The PinchBox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The PinchBox Collection allows you to store all your things in a stylish stackable box, with a spring loaded pinch lid.
- Rating
- 4.5 / 5
- Likes
- 55
- Downloads
- 97
- Makes
- 3
- Views
- 738
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
General
the box comes in 12 different heights which can be seen in the table below.

Components
The Box
Name: “PinchBox_General_xx” (where the xx is the internal height of the box see overview table in pictures)
Material: can be printed in any material, i have used PLA.
Support: not necessarily needed but i have used some which is also included in the G-Code and 3mf files.
Print Orientation: Default STL orientation.
The Lid
Name: “PinchBox_Lid"
Material: can be printed in any material, i have used PLA.
Support: not needed.
Print Orientation: Default STL orientation.
The Lid Cover
Name: “PinchBox_LidCover"
Material: can be printed in any material, i have used PLA.
Support: not needed.
Print Orientation: Default STL orientation.
The Spring
Name: “PinchBox_Spring"
Material: should be a somewhat flexible material, i recommend PETG.
Support: not needed.
Print Orientation: Default STL orientation.
Assembly
- The spring is placed in the lid and the lid cover is then mounted on the back of the lid.
- The lid cover is mounted on the backside of the lid. the flexible fingers on the cover needs to be pushed together and then into the slot on the lid. This can be tricky the first time.

Comments
Happy Printing! and remember to share your results and experiences.