Hammock frame storage wall hooks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are custom wall hooks for quick&easy storage of the Vivere Hammock frame.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are custom wall hooks for the Vivere Hammock frame, which appears to be quite popular on Amazon (probably due to its decent quality for the price).
Fittings:
I used six 4x30mm screws (5mm diameter will fit, too) and (optionally) another six 3x16 or 3x20mm ones. The small screws may be omitted since they are only used prevent the hooks from turning on the wall.
Material:
I recommend to print in ABS or ABS+, especially if you intend to mount the hooks outdoors. PLA, not being UV resistant, will give in to the weight sooner or later and break off. With ABS, the hooks are sturdy enough to let you comfortably remove and attach the side parts to the underframe while it rests in its hooks.
Print Info:
You need to print two of Holder 1 and four of Holder 2.
For the print in the picture about 100g of ICE ABS+ (brave black) were needed at 0.2mm, 18% infill and 3 walls.