Curtain Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project provides the easy changing of three (3) curtains or photography backdrops. To change a curtain rod, it is…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This project provides the easy changing of three (3) curtains or photography backdrops. To change a curtain rod, it is suggested to leave one of the four hooks open and use it to change from one rod to another. Once a rod has been moved, carefully fold the curtain that was previously in front and drop it behind the new curtain.
These hangers are good for storing unused backdrops and easy changing without removal.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra 2 Max
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
15%
Filament: Overture PLA Pro Black
Notes:
PLA can be used or any other filament, like ABS or PETG. With my settings, each hanger weighs 2.1 lbs. Mine are on drywall, not studs, and have anchors with a 50-pound capacity each.
I did not perform much post-processing other than removing supports, light sanding, and spraying with Rustoleum black paint.
A diagram has been uploaded with measurements.
Custom Section
Category: Household