Elegant Vase with Spiraled Design (vase mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Elegant vase with a spiral shape and refined, curved lines.
- Rating
- 4.979 / 5
- Likes
- 684
- Downloads
- 5,058
- Makes
- 58
- Views
- 13,471
- Reviews
- 47
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Elegant vase with a spiral shape and refined, curved lines. The gentle curves give this vase an organic feel that beautifully contrasts with the clean lines in your home. With its narrow neck, it's perfect for some dried flowers or a few decorative branches. Place it on your coffee table or windowsill and you'll instantly have a stylish accent piece.
Specifications
Size: 8.4 x 20 cm (scale as you like)
Print time: 2.5 - 3.5 hours
Resizable: yes, in your slicer
3D Model Type: SOLID body (not hollow inside, specifically designed for vase mode)
Printing technique: FDM / FFF-only
File type: STL
Recommended materials: PLA, PETG
Recommended slicer: Prusaslicer, Cura, Bambu Studio, Orca Slicer, Creality Slicer, Simplify3D
Print difficulty: easy
Recommended nozzle diameter and print settings
For sturdy vase mode prints, a larger nozzle (0.8mm+) and thicker extrusion lines (1.0mm+) are recommended. This combination creates a strong, single-walled structure that compensates for the lack of multiple walls and infill.
Slicer setting: vase mode / spiralize outer contours ENABLED
Nozzle diameter: 0.8mm, 1mm, or larger
Bottom layers: 8
Perimeter speed range: 15 - 30 mm/s
Layer height range: 0.3 mm - 0.5 mm
Extrusion width / wall thickness range: 1mm, 1.2mm or 1.4mm+
Watertight: is possible, but experimental: print hotter than usual (+10 degrees), use a low layer height and lower print speed for improved layer adhesion
License info: PERSONAL USE ONLY, unless you have a commercial license