Ubiquiti Protect Floodlight 30 Degree Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter is designed to allow the floodlight to be mounted to a soffet instead of a wall.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 91
- Makes
- 0
- Views
- 727
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
This adapter is designed to allow the Ubiquiti Protect floodlight to be mounted to a soffit instead of a wall. This allows you to aim the floodlight, rather than only perpendicular to the wall. The mount that comes in the box is 30 degrees, which works fine on an external wall, but cannot be flipped or rotated to correctly angle the floodlight under a soffit. This adapter adds the extra 30 degrees needed to make this work.
One of the holes for installing the screws that attach the adapter to the house is only accessible before the mount and floodlight are installed.
The mount is currently not designed to allow mounting the cable along the surface, but does have a through hole to run the wire into a hole drilled at the mounting location.
The V2 file has 9mm access holes for the house mounting screws, the V1 file has 7mm holes. V3 is just the V2 with a channel for a surface mounted cable.
Installation:
- Drill hole for POE Ethernet cable at desired location.
- Mount adapter over hole and place both mounting screws. Use discretion on mounting hardware, but it should fit included screws.
- Attach mount included in box, using included 2.5mm screws.
- Attach Protect floodlight.