PISA | Self-Watering Planter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meet PISA, our chic and practical large self-watering planter.
- Rating
- 0 / 5
- Likes
- 162
- Makes
- 0
- Views
- 5,990
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
PISA | Self-Watering Planter
Meet PISA, our chic and practical large self-watering planter.
It comes in two sizes:
- Large: Ø 245mm x H 200 mm
- Small: Ø 205mm x H 170 mm.
Scale it up at will.
You can shrink it down to 75% without issues..
You might have watertightness issues if you shrink it further (walls would get too thin).
The printed version on the pictures is missing a funnel that allows to fill the reservoir from the top of the pot.
I added this funnel later on, and the STL files in attachment have it.
DIMENSIONS (Large) | Ø 245mm x H 200 mm (top hole diameter Ø 135 mm)
DIMENSIONS (Small) | Ø 205mm x H 170 mm (top hole diameter Ø 115 mm)
3D PRINTING SETTINGS
For a watertight result, make sure your printer is well calibrated and lubricated.
Then, increase the wall line count to 3.
The wall thickness is 2.4mm, so that makes for 6 wall lines with a 0.4mm nozzle.
That's plenty to make it watertight.
Resolution: 0.2~0.3 mm
Infill: gyroid ~20%
Build adhesion type: 6mm Brim for the Pot. No brim needed for the Reservoir.
Supports: None