*Updated* Rlaarlo AK787 Front Splitter, Wing, and Side Body Retainer/Ground Effect
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Included are files for a front splitter, a rear wing that is 200mm wide and has a smoother airfoil shape than stock,…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 72
- Makes
- 0
- Views
- 656
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Included are files for a front splitter, a rear wing that is 200mm wide and has a smoother airfoil shape than stock, and side body retainer. Consider the front splitter a work in progress, it's a bit thin in the mounting area but regardless of that the splitter is likely breaking in a crash anyway. The rear wing design is pretty much final and the side body retainers final as well. Print the wing halves with the wing endplates touching the bed. use ca glue to assemble the halves after printing. The mount piece for the wing glues in also. Free to share for personal use but no commercial use of my design is permitted.
*I added a front air dam today that you can print and ca to the top of the front splitter.
Category: R/C Vehicles