Molang and Piu Piu
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.05 – €1.29 net (excluding VAT)
For file: Molang_0.2mm_PLA,PLA,PLA_MK3SMMU3_1h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.17 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.25 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Its Molang and his best friend, Piu Piu =^.^=
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 404
- Makes
- 0
- Views
- 1,406
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
Molang is a cute rabbit from a French animated childrens television series. He is soft, he is fluffy, he is Molang ^.^
UPDATE: his best friend Piu Piu is now included <3
Printing Advice
These models were designed for multi-material printing. For Molang, the included .3mf file uses extruders 1 (white), 2 (black), and 4 (pink). For Piu Piu, it uses extruders 5 (yellow), 2 (black) and 4 (pink). You may need to repaint based on your current extruders setting. In this case, use the bucket infill to paint the individual parts. I used 0.20mm (quality) and 15% infill with a brim just to be sure. Both models take roughly 1 hour on the MK3S+ MMU3.
Important: set your purging volumes to purge more filament when transitioning from dark to lighter colors. Find the Purging Volumes button on the side of the infill select box, click on advanced settings, and change the purge to a value of at least 300 like shown in the image below. If you skip this, you may get darker lines when the color changes to white.
