Cutlery Drainer / pen holder / bathroom organizer (Vase mode)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The main part prints in vase mode, can also be used as desk organizer (pen holder), or bathroom organizer.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 87
- Makes
- 1
- Views
- 624
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v3.0
The main part prints in vase mode.
Use 0,8 mm wall thickness*, and bottom thickness between 1, and 2 mm.
Important: There is a 0,01 mm gap, disable the “Slicing gap closing radius” setting (or whatever it's called in your slicer)
The bottom part is optional, and can not be printed in vase mode.
Glue may or may not be needed.
The bottom part is aviable with different clearances, and thare is a test part to easily find out, which one is the most suitable for you.
It's also aviable in two versions:
V1 - Water will stay inside, and needs to be poured out.
V2 - Water will spill away.
*Can be done with 0,4, or 0,6 mm nozzle