1 / 6
Flsun Q5 FanDuct Remixed_02.01.2024 update
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I edited it to fit the Flsun Q5 swappable duct.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 130
- Makes
- 1
- Views
- 504
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Type A is the version without a barrier.
Type B is the version with a mid-section barrier.
Printing without support
ABS and PETG are recommended, but I printed it with PLA.
----------02.01.2024 update note----------
I've addressed some issues that arose during my one-month usage:
- I encountered instances where the output material was getting caught due to its low height. To rectify this, I raised the height by an additional 1.5mm.
- There seemed to be a slight misalignment at the center, so I made some adjustments to realign it properly.
- To prevent sagging downward, I created a fixed hook.
Printing without support structures.
After printing the fixed hook section, simply remove and refine it.