Cup Hooks for BHG Antique Farmhouse Dish Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are printable cup hooks for the better homes and gardens antique farmhouse dish racks. (Old version)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
Hello! This is one of those prints that will likely only be useful for a handful of people, but someone on reddit said they wanted to print them since they had the same dish rack. It's worth noting that I have a pretty old version of this dish rack that has copper handles and a copper basket. Looking at the pictures, it seems like they have made updated versions with some fixes for the annoyingly large gaps in silverware basket, so that's cool.. but it might mean that this only works for the older version as it is. Just looking at the pictures, it didn't really look like the main basket had changed at all though, so it very well could work for both the old and the new versions. This here is the version that I have. If you print it for the newer versions that don't have the copper handles and it works, please let us know in the comments!
To find out if this will work for your basket, you'll want it to fit the following dimensions.
- The top “lip” of flat bar that runs around the top of the basket needs to be less than 2.5mm thick.
- The round bar “rib” that runs along the middle of the backet (the part the second hook locks into) needs to be less than 5mm.
- The distance from the top of the flat bar lip and the round bar rib needs to be between 65mm and 69mm (at max) in length.
If your basket needs these dimensions adjusted, the model is super easy to modify. It is designed using tangent arcs for the curves and has lengths and such set without constraints, so if you needed to change the distance between the lip and rib for instance, you could just select the hook features and use the move tool in fusion to increase or decrease said length. I've included a fusion archive file just in case.
Notes on Printing and Annealing.
My suggestion for these prints would be to print them with a 100% infill, and maybe tack on 3-5% additional flow when printing it. A little overextrusion will make sure that the gaps inside the print are filled well, making things less porous. They were designed with printing on their side in mind and printing this way will ensure that they are very strong.
Printing in PLA:
I suggest trying out “bed annealing” if you are planning on printing in pla and plan on washing them in really hot water. To bed anneal, you just cover your parts once they are finished printing with something like a dish, cover that with something like a towel to help insulate it, then turn your bed up to 85c for 90 minutes. Because the parts are still held to the bed it ensures good thermal transfer, but also helps insure that the parts will avoid warping. After that, turn it down to something like 50c for another 30 minutes and finally let it cool down before removing it. Depending on the filament, it could warp more or less, so if you try this make sure to do one or two pieces first. In my case, I used 3d Fuel Pro PLA+ which is made to avoid warping in annealing and didn't have trouble, though I suspect that most PLA+ blends would work well for these parts. Annealing parts makes them stronger, but the main thing in this case is that it changes the glass transition temperature of the plastic and keeps it from softening unless the temperatures are over something like 80c. (So around 20c hotter than unannealed pla.)
Food Safety:
As for material, any filament that is generally considered a “food safe” filament will work ok I think, though it will be safer to use filaments that specifically mention something about food safety. For information on the role that layer lines play in bacteria growth (or in this case, the negligent role), here is a little article from Hackaday about a study done. The TLDR is that layer lines don't really cause issues and that washing the parts in soap and water remove around 90% or more bacteria. This doesn't say anything about additives in filaments though, so if you do this make sure to look into the additives your filament has if you are concerned with the little bit of contact they make with the cups.