Cakey Cat
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.44 – €5.43 net (excluding VAT)
For file: Cakey_0.2mm_x2_5colorsPLA_MK3SMMU3_5h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.93 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 5.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
He loves to bake and he loves sprinkles. Cakey Cat, from Gabbys Dollhouse
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 418
- Makes
- 0
- Views
- 1,209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
Cakey Cat is a lovely cat who makes yummies for everyones tummies. And, he loves sprinkles. He is one of the resident cats at Gabbys Dollhouse.
I designed this model for my daughter on Nomad Sculpt.
Printing Advice
This model was designed to be printed in colors (MMU or equivalent). No supports needed, but a brim is advised.
The included .3mf file has the pre-sliced model with painting and a few predefined settings. If you are slicing the model yourself, here are a few tips for a perfect print:
- Make sure the seam is on the back of the model.
- More models means less waste. You can also set the model to purge to infill.
- Make sure you set a higher purge volume when transitioning from dark to lighter colors (I used 300). If you change the extruders order, you may need to reconfigure this. Find the Purging Volumes button on the side of the infill select box, click on advanced settings, and change the purge to a value of at least 300 like shown in the image below. If you skip this, you may get darker lines when the color changes to white.
