1 / 4
Rasberry Pi HQ Camera Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A camera stand for the Rasberry Pi QH camera
- Rating
- 4.5 / 5
- Likes
- 41
- Downloads
- 285
- Makes
- 2
- Views
- 1,813
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions.
- PLA
- 0.2 mm layer height
- printed as four pieces
- joint 2 w/ support
- 20% infill
Additional material
- M2x 8 mm with hex nut (4 pieces)
- M3x12 mm with hex nut (3 pieces)
- M3x16 mm with hex nut (1 piece)
- 3mm wood screws (2-4 pieces)
- 2 mm and 3 mm drill
Post-processing
- drill hole
If you like the model buy me a coffee :)
