Dairy Sign
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dairy sign, made on AnkerMake 3D PAINT. Intended to be printed with only blue & white (any other colours will work.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 1
- Views
- 89
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
This is a dairy sign that I made using AnkerMake Make It Real 3D PAINT. This is intended to be printed with only 2 colours (blue and white) but any other colour will still work.
I have included 2 files. One is called Dairy Sign and the other is called Dairy Sign Big. The one I printed, Dairy Sign, is 60.1mm x 26.5mm x 3mm. The Dairy Sign Big is 200.33mm x 88.33mm x 3mm.
Print Parameters:
- First layer height: 0.14
- Layer height: 0.2
Colour Swap Instructions:
- Blue until layer 13 at 2.34mm
- White for the rest
You can scale this very easily to make it any size. However, if you are scaling this, keep the z scale at 100% in order to keep the colour changes at around the same layer. It should be exactly 3mm high.
I printed a stand which I found here. I used this for the smaller version, Dairy Sign, so I scaled it down to 20% on the X axis, 30% on the Y axis, and 20% on the Z axis.
I have also posted this on Thingiverse, which you can find here and AnkerMake make It Real.
I hope this is helpful and happy printing!