Basin Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.61 – €6.85 net (excluding VAT)
For file: 9Z.4-ExtensionBase_6h51m_0.20mm_210C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.23 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 6.85 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This lets you get up behind the sink to thread the hard to get to nut on the spigot.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 89
- Makes
- 0
- Views
- 530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This wrench is designed to reach up behind a sink. The compatible nut size goes from approximately 1-3/8 inch to 5/8 inch.
The extrnsion handle is a press fit with a 0.175 design offset. It seems to work out nicely. To reverse the rotation, remove the jaws and invert it before replacing it on the shaft
The back spring is 0.8 mm thick.