3D printing - infill pattern example tags
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.28 – €4.01 net (excluding VAT)
For file: darin white - waterloo - infill types_0.2mm_PLA_MK3S_3h52m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.65 excluding VAT (range midpoint).
- Weight reported by the author
- 41 g
- Print time reported by the author
- 3.87 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
10 example tags demonstrating various 3D printing infill patterns
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 69
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution — Noncommercial
These tags demonstrate 10 different infill patterns. I've found them useful for teaching, especially beginners.
Fastest way to fab: run the gcode on an i3Mk3S/S+
For other printers: load the .3mf file in Prusaslicer as a “Project”. That specifies the per-tag infill pattern as well as the colour change at around the 3.4mm layer and the print pause at around 4.4mm where you should stop the job to leave the infill patterns exposed.
Adding other infill patterns: the .stl file has a blank tag and cylinder object that can be used to create other tags.