Bernina Q20, Q24 (Q Series) Take up Lever Pin and 2.4mm Distance Gauge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tools used for setting the timing of the Bernina Q series longarm sewing machines.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Bernina Q20, Q24 (Q Series) - Pin in order to “pin the take up lever” and 2.4mm distance gauges. The maintenance manual often instructs you to pin the take up lever. The hole for the pin is a 3.5mm. This pin design is 3.7mm as my printer was printing it slightly smaller and the actual print came out at 3.5mm even though the design is 3.7mm.
The 2.4mm distance gauge is used for helping to set the needle bar to the correct height when adjusting the timing of the sewing machine (timing = hook and needle alignment). The maintenance manual refers to a clamp and a gauge which a regular person does not have. I used this gauge and a sharpie to mark the needle bar so I would know where to set the bar to the right height without having a clamp. It seems to have worked. (I'm including the semi-circle parts but I did not use them – the longer tool was easier to use.)
Maintenance manual section 3.2.
These are super simple, nothing fancy, but they worked for me.
