1 / 5
Sonic the Hedgehog
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sonic the Hedgehog fully colored Sonic the Hedgehog from Sonic 1.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 94
- Makes
- 0
- Views
- 1,165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This Print uses 5 colors/filaments, they must have the right transparency to create the shading effect.
If you don't got the same filaments or filament with with the same colors an transparencies, your mileage may vary.
You don't need a multi color Printer, color changes are only on layer changes so you can pause the print and change the color.
Print instructions:
- Don't scale the model in the height direction or the layers wont get the right colors.
- Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
- PLA BambuLab Basic Black Transmission Distance: 0.6
- PLA BambuLab Basic Jade White Transmission Distance: 5
- PLA BambuLab Matte Scarlet Red Transmission Distance: 2
- PLA BambuLab Basic Orange Transmission Distance: 10
- PLA BambuLab Matte Marine Blue Transmission Distance: 2
Swap Instructions:
- Start with Black
- At layer #3 (0.32mm) swap to Jade White
- At layer #9 (0.8mm) swap to Black
- At layer #11 (0.96mm) swap to Scarlet Red
- At layer #17 (1.44mm) swap to Orange
- At layer #18 (1.52mm) swap to Jade White
- At layer #25 (2.08mm) swap to Orange
- At layer #27 (2.24mm) swap to Black
- At layer #28 (2.32mm) swap to Marine Blue
- At layer #31 (2.56mm) swap to Jade White for the rest.